r r
rr 1.Application Range
rPVC and MDF, particleboard adhesion(also suitable for high light leather, PET leather)General used for door, speaker etc. high requirement products.r
r 2.Product features
r1) Strong sticky strength
r2) good spray craft
r3) good weather-resistance after cohere
r4) The addition of curing agent will be better performance.r
r 3.Technical Index
rAppearance ivory liquid
rPH 6.0-9.0
rViscosity mpas 25℃ ≥500
rPacking specification 20kg/barrelr
r 4.Method of Use
r1) Coating method, spraying or manual brush；
r2) The water percentage of sticky MDF should lower than 18%；
r3) The operation environment temperature as far as possible in the range of 15-25℃；
r4) Glue brushing volume:60-200g/square meter；
r5) Vacuum suck time: 120-200 seconds；
r6) Hot activation temperature( glue lay): not below 55℃；
r7) Cleaning: before the drying of test glue can be cleaned by water.r
r 5.Note
r1) Do not mix with the glue of other brand;
r2) The surface of the base material must be cleaned;
r3) Customers can use it according to the actual conditions. The advice is just for reference only without responsibility;
r4) Storage: the period is 6 months at 10-25℃( containers must be covered tightly).r
